Black Friday Deals! $100 off every Gauge

Krispy Workshop's

Haltech WB1 - Krispy Gauge 52mm Bundle

Haltech WB1 - Krispy Gauge 52mm Bundle

US$673

Approximate — this gauge is priced in New Zealand dollars at NZ$1200, and Stripe converts to your currency at checkout.

A perfect match! A Krispy Gauge 52mm to go with a Haltech WB1, running in standalone mode allows you to monitor your Wideband data, perfect on a OEM or Carbuerated Classic, and fully customisable

The Haltech WB1 is a single-channel CAN wideband controller for one Bosch LSU 4.9 sensor, with a 1.2m (4ft) harness. Paired with a KrispyGauge it shows live AFR and lambda for each bank, updated 20 times a second, with a full-screen warning if either side goes lean.

No Haltech ECU needed. KrispyGauge reads the WB1 directly over CAN, so it works on a car with a factory ECU, alongside a Haltech or other supported ECU, or with no CAN-capable ECU at all. On a Haltech Nexus, Elite or Platinum ECU the WB2 also feeds the ECU, and is set up in NSP, ESP or ECU Manager.

  • Bosch LSU 4.9 sensor version
  • Connects with DTM-4 CAN cables and a CAN hub
  • On the gauge: choose WB1 device A, B, C or D under Settings to match the controller, and set the CAN bus to 1 Mbit/s. Channel 1 also drives the gauge's main AFR reading.

Wiring, setup and FAQs are in our Haltech WB1 / WB2 wideband gauge guide. KrispyGauge's wideband support is currently in beta.

Only 1 left

Secure checkout by Stripe. Cards, Apple Pay and Google Pay accepted. Questions? Get in touch.

Shipping calculated at checkout.

Goes well with