KrispyGauge — 52mm Multi-Protocol CAN Bus Round Display Gauge

Krispy Workshop's

KrispyGauge 52mm

52mm multi-protocol CAN bus round touchscreen gauge

Configure it from any phone or laptop over Wi-Fi

Full round colour touchscreen
Haltech CAN Protocol
OBD2/EOBD over ISO 15765-4
Link, MaxxECU, Holley, Megasquirt, AEM, EcuMaster, Emtron, rusEFI, Syvecs, TurboLamik and NMEA 2000 in beta
Haltech CAN keypad emulation
Standalone Haltech TCA modules, AEM thermocouples, AEM 6-channel sensor modules and Haltech Wideband in beta
Programmable warning thresholds with full-screen alerts
Live telemetry streaming to VRacer over Bluetooth
12V-24V compatible, 0.180 A peak draw
Fits any standard 52mm gauge pod or dash panel

… (Read More)

In stock

Order Now

Krispy Workshop's

KrispyGauge 52mm/60mm

52nn/60mm multi-fit multi-protocol CAN bus round touchscreen gauge

60mm/Proud Bezel Larger display units are now availiable on Pre-Order.

These will mount to a 52mm or 60mm gauge mount (Adapter required for 60mm)

Configure it from any phone or laptop over Wi-Fi

Full round colour touchscreen
Haltech CAN Protocol
OBD2/EOBD over ISO 15765-4
Link, MaxxECU, Holley, Megasquirt, AEM, EcuMaster, Emtron, rusEFI, Syvecs, TurboLamik and NMEA 2000 in beta
Haltech CAN keypad emulation
Standalone Haltech TCA modules, AEM thermocouples, AEM 6-channel sensor modules and Haltech Wideband in beta
Programmable warning thresholds with full-screen alerts
Live telemetry streaming to VRacer over Bluetooth
12V-24V compatible, 0.200 A peak draw
Fits any standard 52mm or 60mm gauge pod or dash panel - 60mm with included size adapter

… (Read More)

Pre-order

Order Now

WHAT'S INSIDE

Built Different.

Built for every ECU and every vehicle — from Haltech to OBD2 and beyond.

Round Touchscreen

Full circular touch interface fills the 52mm bezel edge-to-edge. Control everything with a tap — no buttons, no clutter, clean install every time.

Smart Warnings

Programmable threshold alerts with full-screen visual warnings. Set limits for boost, temps, RPM — get alerted before damage can occur.

WiFi Config

Configure KrispyGauge wirelessly over WiFi. Customise gauge face layouts, colour themes, and warning thresholds from any device.

Multi-Protocol Support

Native Haltech CAN — Nexus, Rebel and Elite — plus any OBD2/EOBD vehicle running ISO 15765-4. Link, MaxxECU, AEM, EcuMaster, Megasquirt, Holley, Emtron KV/SL, rusEFI, Syvecs S6/S7, TurboLamik TCU and NMEA 2000 marine are in beta, alongside Haltech TCA4 & TCA8 thermocouple modules. No adapters, no headaches. See every supported protocol.

UNIQUE FEATURE

Keypad Emulation

A unique feature of KrispyGauge is its ability to emulate a Haltech CAN Keypad on Haltech ECUs — directly from the touchscreen, with no separate keypad unit required. Engage launch control, switch traction maps, toggle pit limiters, cycle boost maps, activate anti-lag, and trigger any custom ECU function. One gauge. Total control.

UNIQUE FEATURE

VRacer Support

KrispyGauge integrates with VRacer — the advanced motorsport data logging and analysis app. Stream live telemetry from your gauge direct to VRacer for in-depth performance analysis, lap timing, and data overlay.

NATIVE INTEGRATION

Haltech.
Keypad Emulation.

KrispyGauge integrates with Haltech natively. Connect to any Haltech Elite or Nexus ECU's CAN network and instantly access every channel — RPM, boost, AFR, coolant temp, knock, fuel pressure, and more. No adapters. No configuration headaches. Just plug in and go.

UNIQUE FEATURE

Keypad Emulation

A unique feature of KrispyGauge is its ability to emulate a Haltech CAN Keypad on Haltech ECUs. Every programmable ECU function your Haltech supports is accessible directly from the 52mm touchscreen — without needing a separate keypad module wired into your car. Engage launch control, step through traction control maps, toggle anti-lag, switch fuel and ignition maps, arm the pit limiter, and trigger any user-defined ECU function — all from a single tap on the gauge face. The KrispyGauge appears to the Haltech ECU as a native CAN Keypad, so setup is instant and every channel responds exactly as it would from a physical keypad.

HALTECH ECU

Elite / Nexus

CAN BUS H/L

KRISPYGAUGE

52mm Display

CAN Keypad Emulation — Live

MOTORSPORT DATA & TELEMETRY

VRacer
Integration.

KrispyGauge works seamlessly with VRacer — the professional-grade motorsport data logging and telemetry platform built for serious racers and tuners. With VRacer support built into KrispyGauge, your gauge becomes a live data gateway: stream real-time engine telemetry directly from your CAN bus to the VRacer app for instant analysis, lap-by-lap comparison, and performance optimisation.

VRACER APP

What is VRacer?

VRacer is an advanced motorsport data logging and analysis application designed for track use. It captures, visualises, and analyses vehicle data in real time — overlaying telemetry on video, plotting channel graphs, tracking lap delta times, and identifying performance trends across sessions. Whether you're chasing tenth-of-a-second lap improvements or diagnosing tune issues at the track, VRacer gives you the data tools professionals rely on. KrispyGauge streams live CAN data directly into VRacer over Bluetooth to your phone, so you get full telemetry visibility without any additional hardware.

Learn more at vracer.io →

VRACER

Professional motorsport data & telemetry

Visit vracer.io

Live CAN telemetry streamed over Bluetooth to your phone

Lap delta & session comparison

Video overlay with channel data

No additional hardware required

TECHNICAL DATA

Specifications.

Form Factor	52mm Round Gauge
Display	Full Round Colour Touchscreen
Interface	Touch-Only — No Buttons Required
CAN Protocol	Haltech ECU's (Nexus / Rebel / Elite) OBD2/EOBD (ISO 15765-4 only) Supported Vehicles Haltech TCA4 & TCA8 — Standalone Link (Beta) MaxxECU (Beta) Holley (Beta) Megasquirt (Beta) AEM (Beta) EcuMaster (Beta) NMEA 2000 — Marine (Beta) Emtron KV/SL Series (Beta) rusEFI (Beta) Syvecs S6/S7 (Beta) TurboLamik TCU (Beta) AEM-30-2224 Thermocouple Box — Standalone (Beta) AEM-302226 6-Channel Sensor Module — Standalone (Beta) Haltech WB1/WB2 Wideband Controller — Standalone (Beta) ECU Protocols Docs
CAN Keypad Emulation	Haltech 2×4 A & B Keypads
VRacer Integration	VRacer — Live telemetry streaming over Bluetooth
Wireless Connectivity	Configure over WiFi from any device at http://4.3.2.1
Warning System	Programmable Thresholds + Full-Screen Alerts
Power Supply	12V Compatible
Current Draw	0.180 A peak
Mounting	Standard 52mm Gauge Pod / Dash Panel