Krispy Workshop's
Haltech WB2 - Krispy Gauge 52mm Bundle
Haltech WB2 - Krispy Gauge 52mm Bundle
US$841
+ US$0 for the , once however many gauges. Buying more than one? The rest daisy-chain on XH4 leads. Additional OBD cables can be bought separately in the accessories section.
Approximate — this gauge is priced in New Zealand dollars at NZ$1500, and Stripe converts to your currency at checkout.
A perfect match! A Krispy Gauge 52mm to go with a Haltech WB2, running in standalone mode allows you to monitor your Wideband data, perfect on a OEM or Carbuerated Classic, and fully customisable
The Haltech WB2 is a dual-channel CAN wideband controller for two Bosch LSU 4.9 sensors, with a 1.2m (4ft) harness. Paired with a KrispyGauge it shows live AFR and lambda for each bank, updated 20 times a second, with a full-screen warning if either side goes lean.
No Haltech ECU needed. KrispyGauge reads the WB2 directly over CAN, so it works on a car with a factory ECU, alongside a Haltech or other supported ECU, or with no CAN-capable ECU at all. On a Haltech Nexus, Elite or Platinum ECU the WB2 also feeds the ECU, and is set up in NSP, ESP or ECU Manager.
- Two sensors: for V6 and V8 engines, twin-turbo setups, or anywhere you want to see each bank separately. For one sensor, see the WB1.
- Bosch LSU 4.9 sensor version
- Connects with DTM-4 CAN cables and a CAN hub
- On the gauge: choose WB2 device A, B, C or D under Settings to match the controller, and set the CAN bus to 1 Mbit/s. Channel 1 also drives the gauge's main AFR reading.
Wiring, setup and FAQs are in our Haltech WB1 / WB2 wideband gauge guide. KrispyGauge's wideband support is currently in beta.
Secure checkout by Stripe. Cards, Apple Pay and Google Pay accepted. Questions? Get in touch.
Shipping calculated at checkout.
Goes well with
Haltech WB1 - Krispy Gauge 52mm Bundle
Haltech WB1 - Krispy Gauge 52mm Bundle
KrispyGauge 52mm CAN Gauge
52mm round touchscreen CAN bus gauge for Haltech, Link, OBD2 and more
KrispyGauge 60mm CAN Gauge
60mm round touchscreen CAN bus gauge that fits 52mm or 60mm mounts
Mazda RX4 Digital Dashboard
Mazda RX4 Digital Dashboard kit powered by KrispyGauge
Mazda RX3 Digital Dashboard
Mazda RX3 Digital Dashboard kit powered by KrispyGauge
Haltech 1.2M (48") DTM-4 Male-Male Cable
HT-130025 - 1.2M (48") DTM-4 to DTM-4
Krispy Gauge OBD Cable
1.5M OBD Cable Pre-Wired for KrispyGauge
Haltech 1.8M (72") DTM-4 Male-Male Cable
HT-130026 - 1.8M (72") DTM-4 to DTM-4