Krispy Workshop's
Haltech WB2 - Dual Channel O2 Wideband Controller Kit
WB2 Bosch - Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
US$515
+ US$0 for the , once however many gauges. Buying more than one? The rest daisy-chain on XH4 leads. Additional OBD cables can be bought separately in the accessories section.
Approximate — this gauge is priced in New Zealand dollars at NZ$919, and Stripe converts to your currency at checkout.
The Haltech WB2 is a dual-channel CAN wideband controller for two Bosch LSU 4.9 sensors, with a 1.2m (4ft) harness. Paired with a KrispyGauge it shows live AFR and lambda for each bank, updated 20 times a second, with a full-screen warning if either side goes lean.
No Haltech ECU needed. KrispyGauge reads the WB2 directly over CAN, so it works on a car with a factory ECU, alongside a Haltech or other supported ECU, or with no CAN-capable ECU at all. On a Haltech Nexus, Elite or Platinum ECU the WB2 also feeds the ECU, and is set up in NSP, ESP or ECU Manager.
- Two sensors: for V6 and V8 engines, twin-turbo setups, or anywhere you want to see each bank separately. For one sensor, see the WB1.
- Bosch LSU 4.9 sensor version
- Connects with DTM-4 CAN cables and a CAN hub
- On the gauge: choose WB2 device A, B, C or D under Settings to match the controller, and set the CAN bus to 1 Mbit/s. Channel 1 also drives the gauge's main AFR reading.
Wiring, setup and FAQs are in our Haltech WB1 / WB2 wideband gauge guide. KrispyGauge's wideband support is currently in beta.
Secure checkout by Stripe. Cards, Apple Pay and Google Pay accepted. Questions? Get in touch.
Shipping calculated at checkout.
Goes well with
K-Line to CAN Adaptor for Pre-2008 Cars
Connect a pre-2008 K-Line car to a CAN gauge or dash
Haltech PDM16
HT-198000 Haltech PDM16
Haltech TCA-8 Thermocouple Amplifier
Haltech TCA-8 Thermocouple Amplifier
Haltech WB1 - Single Channel O2 Wideband Controller Kit
WB1 Bosch - Single Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft)
KrispyGauge 52mm CAN Gauge
52mm round touchscreen CAN bus gauge for Haltech, Link, OBD2 and more
KrispyGauge 60mm CAN Gauge
60mm round touchscreen CAN bus gauge that fits 52mm or 60mm mounts
Mazda RX4 Digital Dashboard
Mazda RX4 Digital Dashboard kit powered by KrispyGauge
Mazda RX3 Digital Dashboard
Mazda RX3 Digital Dashboard kit powered by KrispyGauge